High-resolution, high-resolution SIP online meeting equipment - The Cisco SX10 is a compact, compact system designed for medium and small meeting rooms.
This device supports a maximum image resolution of 1920x1080p 30fps for video and 1280x768 (WXGA) 5fps for presentation content. The Cisco SX10 includes a high definition (HD) camera and built-in microphone, an infrared remote control and a cable to connect to a PC. One option available: Desktop Microphone.
Maximum point-to-point connection speed is 3 Mbit / s; Compatibility with H.323 codecs with a range of resolutions from QCIF (176x144) with 1080p (1920x1080) pixels resolution. The quality of the meeting depends on the capabilities of the remote CODEC and connection speed.
• Compact system
• Simple user interface
• PoE support (Power over Ethernet - a technology that allows network cables to carry electrical power)
Cisco SX10 hardware description
The Cisco SX10 online meeting equipment's codec processor is compactly designed to be mounted on the screen using the optional wall mount or VESA bracket. With a 10/100 Ethernet switch and 3 Mbit / s data transfer capability, the system can display a maximum resolution of 1080p images at 30 frames per second on the main video channel. Power over Ethernet (PoE) can also be used to power the system, simplifying the installation process.
The main HDMI digital audio output connector, a separate analog 3.5 mm audio output connector, is also provided. Screen output automatically selects the resolution and aspect ratio.
When not in a call, the display main menu interface with access to:
• Installation (but limited to certain parts)
• Call the application
• Preview the input of the presentation
• Camera control
• Selfview control
The Selfview control in the camera menu, the top right of the user interface, the user can turn off / open the PIP mode and manually view full screen options; PIP locations can be moved in the Cisco SX10 online meeting device user interface.
On some monitors, HDMI inputs, menus and information presented at the edges of the screen may be "cut". The Cisco SX10 codec can be controlled to overcome this problem with "Overscan Level". However, the adjustment only affects the menu information while the content of the document is still cut. In addition, the DVI input of the monitor can be used via an HDMI-DVI cable to ensure that all information on the screen, including computer desktop images, is possible. see.
The input of the Cisco SX10 Codec includes an HDMI and VGA port that comes into contact with the computer connection; Inputs support EDID (Extended Display Identification Data). EDID is a standard published by the Electronic Video Standards Association (VESA). It is a data structure provided by the display to describe its capabilities with a video source. For EDID, the data includes:
• Manufacturers Name
• Manufacturer's serial number
• Type of product
• Phosphor or filter type
• Time is supported by the display
• Display size
• Luminance data
• Pixel map data
EDIDs are very important for DVI and HDMI video sources and occasionally use VGA sources.
This Cisco online meeting equipment system features 1080p PTZ (Pan Tilt and Zoom) cameras with 5x (2.65 optical and digital) zoom and a special 83 degree wide viewing angle. Near-field camera control (FECC) is supported.
With Cisco SX10, BFCP dual video (SIP) video encoding is supported, providing a second one-way video channel. So a video camera and presentation material from a computer can be transmitted simultaneously and displayed on two monitors at the remote points. When the two systems were connected to the online meeting with each other via a 3 Mbit / s connection, it was able to transmit two high-resolution images simultaneously - the main camera at 1080p 30fps and the presentation channels at WXGA 1280x768. .
This Cisco product line of online meeting equipment also includes an integrated microphone on the front of the CODEC. It should be noted that the use of this microphone affects the sound quality, while using the optional desk microphone, the sound quality is significantly improved.
Some audio formats are supported by Cisco SX10. Online meeting equipment maker Cisco has implemented ITU MPEG-4 AAC-LD audio protocol standards for 20KHz low latency analog audio bandwidths that require 64 kbit / s bandwidth. .
A stereo output is available with a 3.5mm mini jack connection, the main HDMI output also carries digital stereo output. The 3.5mm mini audio input jack facilitates connecting the microphone to the desk. The inputs can only be used for audio presentations from a computer or laptop as HDMI input, allowing audio to be transmitted to remote sites and listening locally.
Cisco SX10 Encode is provided at all connection speeds through Advanced Encryption Standard (AES), a symmetric encryption algorithm used by the US government as the encryption standard.
THE REASON WHY YOU SHOULD USE OUR PRODUCTS AND SERVICES
Save time and money. Deeply develop relationships. Increase productivity. Reduce CO2 emissions and preserve our green lungs by using online meeting equipment in place of the travel business today.
• Just pick up the phone and call: (08) .6251.5922 or Hotline: 0918.132.458, our counselor is available to handle all your questions.
• Professional, experienced and well-trained staff with attitudes of courteous and courteous service.
• Our product lines are genuine with the best warranty policy. At the same time, always offer cost-effective and cost-effective solutions for you.
• A clear contract is made based on unity between the two parties. We always put the interests of our customers first.
• Ensure handover of equipment at the agreed time and at the same time ensure that equipment is not damaged during transportation and installation.